Intel D54250WYK NUC Kit Realtek Audio Driver. – When the update is finished, a message will be displayed. Don’t disconnect or power down the TeraStation until the update is finished. During the update process, the info LED will blink. – It will take several minutes for the firmware to update. – Click ‘Update’ and enter the TeraStation’s administrator password. – If multiple TeraStations are connected to the network, select which TeraStation to update. When a TeraStation is detected, an update window will open. – Extract the downloaded file and run “TSUpdater.exe”. Also, stop or exit any firewall software. The last number of the IP addresses should be different. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. – Connect the TeraStation and a computer to run the updater on the same network subnet. – If a “I33 ReplicateFailure” replication error occurs, navigate to ‘Backup’ – ‘Replication’ – ‘Edit Failover Status’ and click ‘Sync’. – If a “Replication I33 ReplicateFailure” error occurs, navigate to ‘Backup’ – ‘Replication’ and click ‘Run Differential Backup’. Do not use an NTFS-formatted drive as a backup target or unexpected behavior may result. – If an external USB drive is configured as a target for TeraStation backup, the drive should be formatted with ext3, XFS, or FAT32. Larger frame sizes may not transfer the data to the TeraStation correctly.
– Make sure the TeraStation’s Ethernet frame size is smaller than the hub or router’s. – Disconnect iSCSI volumes with the iSCSI Initiator before updating the firmware.
To mount them, unplug and then reconnect them. – USB drives may not be mounted automatically after updating the firmware. – Do not turn off the TeraStation until the firmware update is complete and the “finished” message is displayed. – : Modified to deal with a Samba programming vulnerability (CVE-2017-7494).
0 kommentar(er)
